| |
Industrial & Underwater Epoxy Polymer Coatings
PowerWrap provides a line of polymer coatings and adhesives. These polymer solutions are high performance, solvent-free, environmentally friendly, non-hazardous materials and are specially formulated for demanding marine, heavy industrial and underwater applications. Custom formulations are available upon request.
HEAVY DUTY EPOXY COATINGS FOR WET OR DRY SURFACES
"7-Minute" Repairs Above or Below Water
BIO-DUR 911 "7-minute" cure industrial epoxy.
"20-Minute" Repairs Above or Below Water
BIO-DUR 913 "20-minute" cure industrial epoxy
Example Case Histories Available:
Stops Active Leak In 36" Hot Water Line In Manufacturing Plant
"40-Minute" Repairs Above or Below Water
BIO-DUR 563 "40-minute" cure industrial epoxy.
"4-Hour" Repairs Above or Below Water
BIO-DUR 561 Same as BIO-DUR 560 but thicker and pastier for heavy applications by straight-edged spreader, mostly underwater but has use in chemical plants when wide resistance to a variety of chemicals is needed.
Example Case Histories Available:
- Underwater Recoat of Concrete Pilings at Oil-Fired Power Station
- Protection of Minesweeper Hulls Against Wood Boring Worms
- Sealing Leaks at Australian National Aquarium
- Salt Water Protective Coating for 24" Steel Fuel Oil Pipeline
- Recoat Erosion Damage in Concrete On Underwater Penstock Gates in Concrete Dam
- Nuclear Submarine Underwater Hull Fairing Prior to its Next Voyage
BIO-DUR 560SW & 561SW This pair is the equivalent of their non-SW cousins above. They are designed for sea and freshwater applications and are a bit more flexible and easier to apply, esp.on steel which is cathodically protected. They do not have the outstanding chemical resistance of the non-SW variants.
Heavy Duty Above/Underwater Coating / Anti-Radiation Coating
BIO-DUR 560 Easily brushed/plural component sprayed, epoxy esp. for underwater use. Approved Service Level 1 DBA testing for nuclear use.
Example Case Histories Available:
- Recoat of 36" Gas Transmission Pipe with Cathodic Disbondment
- Recoat of Fuel Storage Tank Against Radiological Contamination at Nuclear Cleanup Site
- Recoat of Riverboat Casino Hull
- Underwater Recoat of Theme Park's Concrete Canal to Prevent Leaking Encapsulation of Radioactive Isotopes for Safe Removal from Nuclear Plant's Spent Storage Pool
Industrial & Building Floor Coating
BIO-FLOR 182 Our standard seamless floor coating which has a long, excellent track record with the USPS. BIO-FLOR 182 has been installed in over a million square feet of all types of flooring including concrete loading docks, plywood decking, asphalt planking, VCT and VAT encapsulation.
Example Case Histories Available:
- Lumber Plant Anti-Toxic Chemical Floor
- Elementary School Cafeteria Rehabilitated/Protected From Termite Infestation
- Beer Resistant Brewery Filtering Room Floor
- Anti-Slip Coating for Museum Stairway
- Hospital Encapsulation of Vinyl Asbestos Tile Flooring
High Gloss 100% Solids Epoxy Heavy Duty Protection
BIO-GARD 251 100% solid, non-kevlar reinforced, easy to brush/roll/spray epoxy. Used primarily for waste water applications over a first coat of BIO-GARD 258.
Example Case Histories Available:
Protection of London Eye Steel Ferris Wheel Near River
Heavy-Duty Moisture-Tolerant Anticorrosive Coating
BIO-GARD 257 General purpose, easily applied, flexibilized epoxy for maintenance. "UK" version is formulated for cold, wet conditions. Regular version works well as a very surface tolerant coating for general use.
Example Case Histories Available:
Protects Concrete Dam Surfaces Against Frost and Leakage
Heavy-Duty Chemical Resistant Epoxy
BIO-GARD 258 A thinner version of BIO-DUR 560SW. Easily applied, hard, tough all around heavy duty coating.
|
|
|
Fine Oil & Trading Co. -- An Authorized Sales Agent of PowerWrap LP, a distributor
